Parisa Technology

Flue Gas Oxygen Analyser

Flue gas oxygen Analyzer are used to optimize combustion efficiency in industrial processes by measuring oxygen levels to maintain the correct fuel-to-air ratio, which improves energy efficiency, reduces fuel waste, and minimizes harmful emissions like carbon monoxide.

They are also used for compliance with environmental regulations and for safety and quality control in applications such as power plants, cement factories, and refineries. 

Flue gas analyzer. testo 310 – Flue gas analysis the easy way. Robust design for daily use. Battery lifetime up to 10 hours. Integrated measurement menus: Flue gas, draught, ambient CO and pressure. Fast sensor zeroing in only 30 seconds. Illuminated display. Documentation of measurement results via printer with infrared interface

Digital CO2 Monitor / CO2 Meter Gas Analyzer with Temperature and Humidity Test

 

Specification:

 

1.Large LCE Display: 3.5” (8.9cm) LCD display with backlight

2.Logger Mode: Key stat/stop, Immediately, Schedule, Real-time & Roll-over

3.Carbon Dioxide Range: 0~9,999PPM

4.Accuracy: ±50ppm ±5%rdg (0~2000)

5.Response Time: 10sec

6.Temperature Range: -10.0~70.0C (14~158F)

7.Resolution: 0.1C/F

8.Accuracy: ±0.6C/±0.9F (0~50C/32~122F), others±1.2C

9.Humidity Range: 0.1~99.9%

10.Resolution: 0.1%

11.Accuracy: ±3% (10~90%)

12.Logging Memory: 40000

13.Operating Condition: 0~50C, 0~95%RH

14.Storage Condition: -20~60C, 0~99%RH

15.Power Supply: 1A Output 9V AC Adapter or 2 pairs of 1.5v AA battery (not included)

Features:

 

1.Supper large LCD simultaneously display and log Carbon Dioxide Level, Temperature, Relative Humidity, Calendar (Y/M/D) and Time (Clock)

2.Stable NDIR sensor for Carbon Dioxide concentration

3.NDIR Sensor

4.High and low threshold setting

5.Back-light function

6.Recall Max and Min reading

7.Long time drift compensation

 

Packing List:

1X Carbon Dioxide Meter

1X USB Cable

1X Charge Adapter (AC 100~240V 50/60Hz)

1X Small CD

1X English User Manual

 

Flue Gas Analyzer (FGA 100)

Display:  LCD
Sampling Probe: 700 mm, SS, 6mm Sampling Tube
Temperature Probe: 700 mm Thermocouple with 2-3 meter wire
Logging Interval: 1 min-1 Hour (Programbale)
Battery: Rechargeble Battery with charger.
Temperature: K- Type Termocouple