Parisa Technology

Liposuction Infiltration Dosing Pump features :-

 

·         Non-contact type peristaltic infiltration pump

·         Contamination free infusion of tumescent solution

·         Infusion rate variable and footswitch controlled

·         Digital display

·         Memory active for both infused/cumulative volumes

·         Withstands power supply voltage fluctuations (with inbuilt stabilizer)

·         Portable unit

·         Foot pedal control Saline transfer Liposuction Infiltration Tumescent anesthesia Dosing Peristaltic infusion Pump

·         Easy To Operate Long Life, Digital Rotary Knob, Easy To Adjust The Speed ,

·         Full Speed Button Available For Filling In & Emptying Out The Tubing.

·          Non-pollution

·          No need cleaning

·          Low shear force

·         Maintenance convenient

·         Wide application

·         Memory function available in case of power off and it will continue the work once the power was restarted.

·         Good cost performance.

1. TECHNICAL SPECIFICATINS OF PP 1000 EASY FILL :- 

• With ON/OFF Control
• Touch Screen setting : Toolbar, Parameter Setting display, working status display
• Keypad Setting :- Full speed, Direction ,Home , Start Stop
• Communication with user through Keypad & LCD Touchscreen Display
• Digital LCD Display of FILL VOL ,FILL TIME, PAUSE TIME  AND NO. OF CYCLES
• Overall Flow Rate Range :- 0.007~2280ml/min
• Operation Duty – Continuous Digital
• Filling volume : (0.01-9999ml)
• Fill Time : (0.1s-9999min)
• Interval/Pause/Off Time : (0.1s-9999min)
• Filling Times ( No. of Cycles ): 0-9999 ( “0” is in???nite till you make OFF or Power Off)
• RPM – 0.1- 600
• Speed Resolution :- 0.1 RPM
• Bi-directional (Clockwise, Anticlockwise ) ,
• No of Rollers –4 Rollers 
• Suck back time and suck back RPM setting
• Microprocessor Based Stepper Motor Drive for precise filling
• Flow Calibration - Yes
• Operating Environment temperature -  20-30 degree Celsius
• Operating Environment humidity -  40-70%
• Filling Nozzles :- 01, Suction Nozzle -01
• Filling Accuracy: Better than +/-0.5%
• Semiautomatic Programmable Cyclic mode-It can be programmed in such a way that it will fill one bottle , will stop for 0.1/0.5/1/2/3/4 sec (user can set any OFF/PAUSE time ) and again auto start, again stop and continue till last filling or till you stop for filling liquids in bottles/Tubes, Petri Dishes, Vials continuously 1 By 1
• Weight Approx. – 4.8 Kg
• Power consumption - <50W
• Dimensions -  212x139x240 in mm
• Input Supply -230V AC/50Hz

• Touch-Screen Function – Large 3.5-inch Color LCD screen operation , intuitive and intelligent. Long life, easy to operate.
• Hand Dispenser/ Handy Gun :- High precision filling and Tube Handling with adjustable arm and inbuilt START/STOP switch
• Smart Filling :- Best Choice for smart filling of culture media, buffer and other solutions in Petri Dishes, Test Tubes, small bottles ,vial, Ampules etc filling.
• Variety of work modes : Transfer mode, Filling mode.

• Intelligent Filling :- Peristaltic dispensing pumps on function is powerful in microbiology
• External Control Function-Multiple mode selection: communication mode, analog mode, foot switch control. Provide customized services.

• Memory Function- User data storage function: 9 sets of filling data , that can help customer fastly find the original filling data .Data will be stored in time after power off. When power supply is restored, the pump can remember the parameter Settings before power off, which is more safe and reliable. The original filling data can be quickly found by entering the storage interface with one key.
• Calibration Function :- Microprocessor basedIntelligent flow calibration: after setting the target flow, input the actual flow value, and the system will automatically carry out flow calibration to ensure the flow and accuracy. With Calibration function that can ensure the filling accuracy .
• Simple Calibration :- possible with chosen volume

• Full Speed Function-one button to control full speed operation, used for quick cleaning, filling and emptying tubes, etc.

1. Flexibility - This system dispenses volume from 1 ml to 500 ml and switching from tubes to bottles can be done in seconds.
2. User Friendly - Easy to use, Program and Maintaince free
3. Manual Filling Function either by footswitch or timed delay
4. Delay/Pause interval from 1-99 seconds user settable
5. Anti Drop System to avoid excess drop prevents spilts at the filling nozzle.
6. Microprocessor controlled accuracy, fully digital with wipe-to-clean membrane keypad
7. Contamination free tubing with autoclavable silicon tubing
8. Inexpensive,miniature,reliable, sterile media dispenser
9. Precise filling of media with smooth and silent operation
10. Fast and Reproducable and dispensing of exact volumes
11. Easy to clean, no holes or gaps where media can flow into

• No cross contamination Accuracy +/-0.5%
• Change of product in 1 minute Easy Cleaning
• Filling volume:1 ml to 3500 ml (Ex.: 5ml, 10ml, 25ml, 40ml, 50ml, 80ml, 100ml, 150 ml, 180ml, ect.
• Accuracy:Better than +/-0.5%
• Human machine interface:Communication with user through Keypad LCD display
• Input Voltage : 230V AC /50 HZ
• Weight: 8 kg
• Accessories : Filling Suction Nozzles, Silicon Tubes
• Optional Accessories : Stand, Foot Switch

 TECHNICAL SPECIFICATIONS :-

·         No of Channel - One

·         With ON/OFF control - Instant START/STOP

·         Variable speed (RPM)

·         Pump Head - Engineering ABS Plastic

·         Motor- Microprocessor AC Motor Drive

·         Drive Shaft  - Stainless steel

·         No of Rollers -03

·         Roller and Rotor - SS 304

·         Operation: 100% duty cycle -Continuous Run

·         Accuracy - Better than +/- 0.5 %

·         Discharge Pressure: 2/4 bar at maximum rpm

·         Body of Pump - SS , GMP Model

·         Input Supply -230V AC/50Hz

SILICON TUBINGS  :

1.  Required flow rates can be easily achieved by using suitable ID/OD tubing and required speed.

2.       Five Meter Silicon tubing will be provided with unit.

3.       There are different ID/OD food and Pharmagrade ,auto-clavable silicon transparent rubber tubing are used with 3.3 mm WT.

SIZE ( ID,OD&WT )

·         19.6 mm OD x 13 mm ID with 3.3 mm wall thickness ----02 meter
·         16.2 mm OD x 9.6 mm ID with 3.3 mm wall thickness ----02 meter

DESCRIPTION -

The peristaltic liquid transfer Principle is the fastest growing in Pharmaceutical,Food,Bevarges,Cosmetics,Biotechnology,Ink,Pigments,sparay coating industry due to advantages such as no cross contamination, easy cleaning and sterility.The liquid is coming in contact with tubing only causing no cross contamination.

APPLICATIONS :

Peristaltic pumps are widely used in following fields

• Pharmaceuticals
• Food Processing
• Chemicals
• Inks Pigments
• Cell culture
• Filtration and separation
• Pollution control
• Beverage dispensing
• Photo Processing and printing
• Fermentation, Heat treatment
• Aspiration of tissue culture medium
• Circulation of cell suspension in fermentation
• Cosmetic dispensing
• Harvesting cell media
• Nutrient supply for cultures
• Spray coating dispensing
• Sterilised media dispensing
• Acid/base dispensing
• Adhesives for cement
• Circuit board manufacturing
• Dispensing glue emulsions
• Transfer of fuels and lubricants

• The only part of a peristaltic pump that comes in contact with the liquid is the tubing.This maintains the sterility of fluid and the pump
• Self priming - peristaltic pumps can draw fluid into the tubing when starting dry, up to 8.8m suction lift. Other pumps require user to fill pump and suction line with fluid before use which can be inconvenient and also create potential for hazardous spills or contamination
• Gentle pumping action - low shear - makes a peristaltic pump ideal for handling cells and large proteins, as the pumping action will not damage the content.
• Variable speed options available on some peristaltic pumps, making those ideal for dosing applications.

USES AND APPLICATIONS :

Peristaltic pumps are widely used in following fields

• Pharmaceuticals
• Food Processing
• Chemicals
• Inks & Pigments
• Cell culture
• Filtration and separation
• Pollution control
• Beverage dispensing
• Photo Processing and printing
• Fermentation, Heat treatment
• Aspiration of tissue culture medium
• Circulation of cell suspension in fermentation
• Cosmetic dispensing
• Harvesting cell media
• Nutrient supply for cultures
• Spray coating dispensing
• Sterilised media dispensing
• Acid/base dispensing
• Adhesives for cement
• Circuit board manufacturing
• Dispensing glue emulsions
• Transfer of fuels and lubricants

FEATURES & FUNCTIONS OF EASY FILL  

Touch-Screen Function – Large 3.5-inch Color LCD screen operation , intuitive and intelligent. Long life, easy to operate.

Hand Dispenser/ Handy Gun :- High precision filling and Tube Handling with adjustable arm and inbuilt START/STOP switch.

Smart Filling :- Best Choice for smart filling of culture media, buffer and other solutions in Petri Dishes, Test Tubes, small bottles ,vial, Ampules etc filling.

Variety of work modes : Transfer mode, Filling mode.

Intelligent Filling :- Peristaltic dispensing pumps on function is powerful in microbiology.

Memory Function- User data storage function: 9 sets of filling data , that can help customer fastly find the original filling data .Data will be stored in time after power off. When power supply is restored, the pump can remember the parameter Settings before power off, which is more safe and reliable. The original filling data can be quickly found by entering the storage interface with one key.

Calibration Function :- Microprocessor basedIntelligent flow calibration: after setting the target flow, input the actual flow value, and the system will automatically carry out flow calibration to ensure the flow and accuracy. With Calibration function that can ensure the filling accuracy.

Simple Calibration :- possible with chosen volume

Full Speed Function-one button to control full speed operation, used for quick cleaning, filling and emptying tubes, etc.

Suck-back Function: - Anti drop System.

Lock Screen Function-lock screen design, error proof touch, application more secure.

Display Function-Real-time animation of the operation interface shows the running s1100tate and working parameter.

Foot switch control :- For Hand Free operation

Motor :- With both-way large torque, high power stepper motor.

Contamination Free :- Tubes and Stainless Steel Nozzles entirely Autoclavable, no risk of cross Contamination

Tubing :- Accepts different size tubing with same WT for different flow range

Compact :- Easy Handling and Portable

Design :- Whole housing design-stainless steel housing.sturdy and durable , multi-face seamless whole housing design, Long service life, high cost performance.

External Control :-Support RS485/RS232/MODBUS communication protocol , analog quantity control (0-5v 0-10v  4-20mA ...)
 

TECHNICAL SPECIFICATIONS :-

·         No of Channel - One

·         With ON/OFF control – Instant START/STOP

·         Digital LCD Display

·         Variable speed (RPM)

·         Key pad – Feather Touch Digital Control Board

·         Pump Head – Engineering Plastic

·         Bi-directional ( Clockwise, Anticlockwise )

·         Priming Function

·         Motor - Microprocessor Based Gearless Stepper Motor Drive for Precise dosing

·         Drive Shaft  - Stainless steel

·         No of Rollers -02 (Dual Roller with spring loaded Track)

·         Roller and Rotor – SS 304

·         Rotor Springs - Stainless steel

·         RPM: 1 to 300/350

·         Operation: 100% duty cycle –Continuous Run

·         Accuracy – Better than +/- 1 %

·         Discharge Pressure: 2 bar at maximum rpm

·         Input Supply -230V AC/50Hz

LIPOSUCTION INFILTRATION DOSING PUMP FEATURES :-

· Non-contact type peristaltic infiltration pump

· Contamination free infusion of tumescent solution

· Infusion rate variable and footswitch controlled

· Digital display

· Memory active for both infused/cumulative volumes

· Withstands power supply voltage fluctuations (with inbuilt stabilizer)

· Portable unit

· Foot pedal control Saline transfer Liposuction Infiltration Tumescent anesthesia Dosing Peristaltic infusion Pump

· Easy To Operate Long Life, Digital Rotary Knob, Easy To Adjust The Speed ,

· Full Speed Button Available For Filling In & Emptying Out The Tubing.

· Non-pollution

· No need cleaning

· Low shear force

· Maintenance convenient

· Wide application

· Memory function available in case of power off and it will continue the work once the power was restarted.

· Good cost performance.

• no cross contamination
• accuracy +/-0. 5%
• 1 ml to 3500 ml
• drip-free
• change of product in 1 minute easy cleaning
• easy cleaning

• filling volume:1 ml to 3500 ml (ex. : 5ml, 25ml, 50ml, 100ml, 150ml, 200ml upto 3500ml)
• accuracy:better than +/-0. 5%
• human machine interface:communication with user through keypad & lcd display
• tubes:silicone tubes with id 2 mm to 10 mm with wall thickness of 1. 5mm. The tubes are approved for pharmaceutical use, according to fda and usp standards.
• input voltage : 230v ac /50 hz
• weight: 10 kg
• accessories: filling nozzles, tubes, filling stand foot switch etc

• pharmaceuticals
• food processing
• chemicals
• inks & pigments
• cell culture
• filtration and separation
• pollution control
• beverage dispensing
• photo processing and printing
• fermentation, heat treatment
• aspiration of tissue culture medium
• circulation of cell suspension in fermentation
• cosmetic dispensing
• harvesting cell media
• nutrient supply for cultures
• spray coating dispensing
• sterilised media dispensing
• acid/base dispensing
• adhesives for cement
• circuit board manufacturing
• dispensing glue emulsions
• transfer of fuels and lubricants

• Programmable Timer Mode
• Any 1 or 2 or 3 pumps can be kept OFF if not required for use.
• Individual pump can be taken for repair/service if required in future. In multichannel it is not possible.
• All 4 pumps will start at a time with single Foot Padal and will fill 4 bottles at a time, 40 ml in 2 sec.
• Semiautomatic Programmable Cyclic mode-It ca/n be programmed in such a way that it will fill one bottle , will stop for 2/4 sec (user can set any OFF/PAUSE time ) and again auto start, again stop and continue till last filling or till you stop for filling liquids in bottles continuously 1 By 1