Parisa Technology

Brand	Huma-i
Model	Huma-i Black (HI-150)
Power Source	Battery
Display Type	Digital
Measuring Range	0-5 mg
Dimensions	4.06 X 9.14 X 3.81 cm; 60 Grams
Pump	No
Battery Type	Rechargeable Li- Polymer Battery
Weight	60 Grams

Minimum order quantity: 1 Unit

Portable Air Quality Monitor  / DUST / VOC Monitor

Specifications:

Dust / PM2.5 & PM10

Range: 0-500 ug/m⊃3

Resolution : 1 ug/m⊃3

Accuracy: ±10%

 

 

VOC:

Range: 0-10 ppm

Resolution : 0.001 ppm

Accuracy: ±10%

Sampling cycle: 1Second

(The VOC sensor should be preheated for 5 minutes)

 

CO2 Gas :

In form of Graph ie Good (400-700ppm), Moderate (701-1000ppm), Poor (1001-2000) & Unhealthy (2001-10000)  

Range: 400-10000 ppm

Resolution : 1 ppm

Accuracy: ±10%

Sampling cycle: 1Second

(The VOC sensor should be preheated for 5 minutes)

 

Power:

Li-Polymer Battery

Micro USB Supply

 

Brand	Microptik
Usage/Application	Laboratory Use
Parameters	S, P, Cd, Pb, Hg
Measurement Time S	50~1700s (adjust the time according to the test elements and content
Comply Range	0.04ppm ~ 99.99%
I Deal In	New Only

The P-Pal is equipped with the latest in X-ray detector and source technology. 

P-Pal is applied for rapid non-destructive detection of sulfur (S) and phosphorus (P) and also mercury (Hg), cadmium (Cd), arsenic (As), lead (Pb), selenium (Se) in palm oil and also tea, tobacco and crops with a min. detection limit of 0.04ppm, 2~3 min rapid-screening, 25 min accurate measurement.
The P-Pal is provided with powerful and sophisticated software, useful for both the untrained as well as the specialist in spectroscopy. 

Instrument Name	Flash Point Analyzer
Model Name/Number	MFPA-012
Usage/Application	Laboratory
Brand	Parisa
Parameters	PH
Automation	Fully Automatic
Measuring Range	Ambient to 300 DegreeC (Ambient to 572 DegreeF)
Temperature	+5 to 300 DegreeC

MFPA-012 Flash Point Analyzer is an automated closed cup flash point tester with a temperature range of ambient +5 to 300°C (ambient +9 to 572°F). The instrument uses an electric hot wire igniter (a gas flame option is available). There are two modes of operation: Flash/No Flash and Ramp. The Ramp mode increases the sample temperature at a rate of 2°C/min and automatically dips the igniter every 1°C up to 100°C (every 2°C above 100°C), until either a flash is detected or the end of test temperature is reached.